Hawke防爆堵頭（387系列stopping pl
CCG防爆呼吸閥接頭（BDM-E/D系列）
CMP不銹鋼316L鎧裝防爆格蘭（TE1FU
Peppers防爆呼吸閥/防爆堵頭/防爆變
Hawke嵌入式防爆堵頭475 Stopping p
CCG鎧裝防爆格蘭密封接頭（0523-E1E
Eaton-90°防爆轉接頭（Swivel Adap
Eaton庫柏鎧裝防爆格蘭（ADE-4F系列
CMP鎧裝防爆格蘭（E1FU系列）
Eaton庫柏非鎧接管式防爆格蘭（ADCC
Hawke帶膠泥鎧裝防爆格蘭（710/711
CMP非鎧防爆格蘭（A2F系列）
產品詳情
點擊圖片查看原圖產品價格 面議
最小起訂量：0 只 可售數量：500 只
Recessed Stopper Plug, Globally Approved, Explosive Atmosphere Cable / Conduit Accessory
• Provides means of blanking unused cable entries • Temporary or permanent • Tamper-proof (Type B) version available • General purpose / industrial version available • Nylon Ex e only version available (-20°C to +60°C) • -60°C to +200°C (metallic versions) • Globally marked, IECEx, ATEX, cCSAus & UL • For use with threaded entry holes only – for stopper plugs suitable for use in clearance/through holes, please see 757 or 767 • Nylon stopper 717 / 717e to be used for sizes M20, M25, M32, 1⁄2″, 3⁄4″ and 1″
Please note: 747 Stopper Plugs have passed IP66 compliance tests to IEC 60529 with no additional sealing. However CMP would recommend the addition of thread sealant or grease (such as Dow Corning No. 4 Silicone) in order to help maintain IP66 and keep water out of the enclosure in the long-term. The addition of thread sealant or grease is permitted as long as it is non-setting, non-metallic and non-combustible in compliance with IEC 60079-14.
| Description | Allen Key Recess | metallic | Non-metallic | |||
| Ex 'd' | Ex 'e' | Industrial | Ex 'e' | Industrial | ||
| 747 Recessed Non-Tamper Proof Type 'A' | Y | Y | Y | Y | Y | Y |
| 747 Recessed Tamper Proof Type 'B' | Y | Y | Y | Y | Y | Y |
| 757 Hexagon Head | N | Y | Y | Y | Y | Y |
| 757 Hexagon Head c/w 'O' ring seal | N | Y | Y | Y | Y | Y |
| 767 Dome Head | Y | Y | Y | Y | Y | Y |
| 767 Dome Head c/w 'O' ring seal | Y | Y | Y | Y | Y | Y |
| 717 Universal | Y | N | N | N | Y | Y |
HOW TO ORDER e.g. 747 – D – A – M – 3 – 1 = Dual Certified Ex d & Ex e- Type A – M25 – Aluminium
For Tamper-Proof Type B Stopper Plugs please substitute the letter A with the letter B in the ordering reference list below.
Other thread variations are available on request.
For further information on ordering please contact EPIN AUTOMATION.
| Ordering Reference |
Thread Size |
Minimum Thread Length |
Allen Key Size A/F |
| 747DAM1 | M16 X 1.5 | 15.0 | M8 |
| 747DAM2 | M20 X 1.5 | 15.0 | M10 |
| 747DAM3 | M25 X 1.5 | 15.0 | M10 |
| 747DAM4 | M32 X 1.5 | 15.0 | M10 |
| 747DAM5 | M40 X 1.5 | 15.0 | M10 |
| 747DAM6 | M50 X 1.5 | 15.0 | M10 |
| 747DAM7 | M63 X 1.5 | 15.0 | M14 |
| 747DAM8 | M75 X 1.5 | 15.0 | M14 |
| 747DAM9 | M90 X 2.0 | 24.0 | M14 |
| 747DAM10 | M100 x 2.0 | 24.0 | M14 |
| Dimensions displayed in millimeters unless otherwise stated | |||
| If a nylon stopper is required for sizes M20, M25, M32, 1⁄2", 3⁄4" and 1" please order717 or 717e. | |||
